Virgin Mini WiFi Modem Uživatelská příručka stáhnout pdf (Strana 105)

Settings 97

Settings

● Port Triggering — You can set the device to monitor outgoing data on specific port numbers

(trigger ports). (See

“Port Trigger Panel” on page 103.)

● DMZ — You can select one computer to receive all unsolicited incoming connections. (See

“DMZ Panel” on page 104.)

● UPnP (universal plug and play). (See “UPnP (Universal Plug and Play)” below.)

● SPI (stateful packet inspection). (See “SPI (Stateful Packet Inspection)” below.)

● Router Settings Reset. (See “Resetting the Software to Default Settings (Through the Browser

Interface)” on page 107.)

UPnP (Universal Plug and Play)

UPnP provides simple and robust connectivity among consumer electronics, intelligent

appliances, and mobile devices from many different vendors. (For more information, see

www.upnp.org.)

Enabling UPnP

Before you can use UPnP, you must enable it.

1. Log in to the home page.

2. Click Advanced Settings > Router > Basic.

3. Next to UPnP, select Enable.

SPI (Stateful Packet Inspection)

SPI, also known as “dynamic packet filtering,” helps to prevent cyberattacks by validating that the

traffic passing through a session conforms to the protocol used for this type of session. Packets

that are not conforming get rejected.

Enabling SPI

Before you can use SPI, you must enable it.

1. Log in to the home page.

2. Click Advanced Settings > Router > Basic.

3. Next to SPI, select Enable.

LAN Panel

1. Log in to the home page.

2. Click Advanced Settings ( ).

3. Click Router > LAN.

Note: If UPnP is enabled, there are potential security risks.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 173 174

Žádné komentáře

Virgin Mini WiFi Modem Uživatelská příručka Strana 105